Skip to main content

How to set up proactive outreach with Fin Skills

Learn how to set up a proactive Fin Skill, control who Fin reaches out to and when, preview outreach, and report on results.

Written by Dawn P

Use this article to set up a proactive Fin Skill, so Fin starts the conversation with customers who match an audience instead of waiting for them to message first. You'll learn how to configure who Fin reaches out to, when, and where, preview outreach and follow-ups, report on proactive Skills, and check their limitations. Proactive Skills are available on all plans with Fin access. Fin Skills are in closed beta. To request access to Fin Skills in the Intercom helpdesk, join the Fin Skills waitlist. To learn what Fin Skills are and how to build one, see Getting started with Fin Skills.


How to start a proactive Fin Skill from the Proactive outreach template

  1. Go to Fin AI Agent > Train > Skills.

  2. Select New skill.

  3. Under Template, select Proactive outreach. The template describes itself as: Fin starts the conversation with customers who match your audience, then follows your instructions.

    The Skills page under Fin AI Agent > Train > Skills, with Skills highlighted in the left navigation and an arrow pointing to the New skill button. The New skill menu is open, showing Let Operator draft your skill, Create from scratch, and under Template, Proactive outreach: Fin starts the conversation with customers who match your audience, then follows your instructions.

  4. Adapt the Skill's instructions to your use case, then set the Reach out proactively trigger settings: channels, audience, when to send, where to send, frequency, and follow-ups. Each setting is described in the section "How to configure proactive outreach in a Fin Skill".

  5. Publish the Skill to activate outreach. Clicking Save to Fin Main doesn't start outreach.


How to configure proactive outreach in a Fin Skill

Teammates who build Fin Skills can use the Reach out proactively trigger to control who Fin contacts, when, where, and how often.

Note: Publish the Skill to activate its proactive outreach settings. Clicking Save to Fin Main doesn't start outreach.

How to add the Reach out proactively trigger to a Fin Skill

  1. In the Fin Skill editor, select + Add trigger in the Triggers section.

  2. Choose Reach out proactively.

The Fin Skill editor with the Triggers section open and the Add trigger menu expanded. The menu lists four triggers: Reach out proactively (Fin starts a conversation with customers who match a selected audience and loads this skill), Website element click, API call, and Inbox trigger. Reach out proactively is highlighted at the top of the list.

After you add the Reach out proactively trigger to a Fin Skill, Fin starts the conversation for people who match an audience, instead of waiting for the customer to message first.

The Reach out proactively panel open on the right side of the Fin Skill editor. It lists seven settings: Channels, Audience, When to send, Where to send, Frequency, Follow up if they go quiet, and Let Fin continue after this skill ends. Cancel and Add trigger buttons sit at the bottom of the panel.

The Reach out proactively trigger has these settings:

  • Channels — where Fin reaches out. Messenger outreach fires when the customer is active; email reaches people who aren't active, and Messenger gets the first chance with recently active customers. In the Select channels dropdown, choose Messenger channels (Web, iOS, Android) and the Email channel.

  • Audience — who Fin reaches out to. Select one or more saved audiences from the Select audience dropdown, or select Manage audiences to work with your saved audiences.

  • When to send — only reach out when one of the events you add happens. Leave it empty to reach out as soon as someone matches the audience.

  • Where to send — only reach out on certain pages. To add page rules, make Web the only channel.

  • Frequency — reach out once, or again when someone re-matches the audience. If you choose to reach out again, set the minimum number of days between reach-outs. Follow-ups don't count as a new reach-out.

  • Follow up if they go quiet — turn on the Enable toggle, then set how many times Fin follows up and how often. Fin can send up to 14 follow-ups, with a minimum gap between them.

    No reply, no charge: unanswered outreach, including follow-ups, isn't billed. Once the customer replies, normal Fin billing applies. Beta pricing is subject to change.

How to choose which channels Fin reaches out on

Channels sets where Fin reaches out. Open the Select channels dropdown and choose one or more options. Under Messenger, the options are Web, iOS, and Android. Under Other, the option is Email.

Who does Fin reach out to with a proactive Skill?

Fin reaches out to people who match the Fin Audiences you reference in the Reach out proactively trigger. Matching evaluates the rules of the referenced audiences, including their role restrictions, so keep the data those rules use current.

How to use When to send to make Fin reach out when a customer does something specific

By default, Fin reaches out as soon as a customer matches the audience. With When to send, you pick one or more events, and Fin reaches out only when the customer does one of them. For example, you can send on a "checkout completed" event so Fin starts the conversation right after a purchase.

You can narrow each event with filters on its details, such as the plan name or order value. The customer must still match the audience. Fin can use the event's details in its message, so it can refer to what the customer just did. To go back to audience-only outreach, remove all events.

How to use Where to send to control which pages Fin reaches out on in Messenger

Where to send uses page rules to control where Fin can start a proactive conversation in Messenger. For example, set a Page URL (web address) rule so Fin only starts the conversation when the customer is on your pricing page. The customer must still match the audience and any When to send conditions you configured. To add page rules, make Web the only channel.

How to control how often Fin reaches out to the same person

Frequency controls how often Fin can reach out to the same person. Follow-ups don't count as a new reach-out. Choose Reach out once per person, or choose Reach out again if they still match the audience and set the minimum number of days between reach-outs in the At least field, which is followed by days apart.

How to set up follow-ups when a customer goes quiet

Follow up if they go quiet makes Fin follow up in the same conversation until the person replies, the goal is met, or follow-ups run out. Turn on the Enable toggle, then set how many times Fin follows up and how often, using the number fields and the unit dropdown. If the Skill's instructions describe follow-up behavior, Fin uses those instructions together with the limit and the minimum gap.

What does Let Fin continue after this skill ends do?

Let Fin continue after this skill ends controls what Fin can do once the Skill finishes. It's separate from your existing deploy settings and applies when the Skill is started by an event or proactive outreach. The panel lists Use your content, Follow guidance, and Detect attributes, with a Settings button. Under If Fin can't resolve the conversation, send it to, choose a Team or a Workflow, and enter what Fin should say to the customer before it sends the conversation on.

How do email and Messenger delivery work for proactive outreach?

Proactive outreach in a Fin Skill is delivered differently on Messenger and on email. The following points describe how each channel works:

  • Messenger: Fin evaluates proactive outreach in Messenger when a customer's Messenger checks in.

  • Email: proactive email outreach uses periodic audience matching, which runs approximately hourly. Queueing, eligibility checks, and usage limits can add delay, so delivery within a fixed hour isn't guaranteed.

  • Both channels: when you select Messenger and email, an activity grace period gives Messenger the chance to reach recently active customers before email.

  • Email requirements: email outreach needs a correctly configured Fin email address and a contactable customer with a known, deliverable address.

  • Email exclusions: Fin doesn't send proactive email to recipients who unsubscribed, marked an email as spam, or hard-bounced.


How to preview proactive outreach and test follow-ups with Skip ahead

To preview proactive outreach in a Fin Skill:

  1. Open the Skill's preview.

  2. Set Conversation started by to Fin outreach.

  3. Choose the customer to test as.

  4. Select Messenger or email.

  5. Click Generate outreach message to see how Fin would open the conversation using the Skill and that customer's context.

  6. Reply as the customer to test how Fin continues the Skill.

Previews don't send anything to the real customer, and they don't test audience matching or delivery timing. Save your changes before starting a new preview so it uses the version of the Skill you intend.

To test follow-ups without waiting, leave the opening message unanswered. If Fin schedules a follow-up, the preview shows the planned follow-up and a Skip ahead button. Clicking Skip ahead advances the preview's simulated clock to the next follow-up decision, so you can test a delay of hours or days immediately.

When you test follow-ups for a proactive Fin Skill in the preview, keep these points in mind:

  • Skip ahead doesn't force a message. Fin decides whether to follow up using the Skill's instructions and the customer's context, so it may send a message, schedule another follow-up, or stop.

  • Follow-up settings are limits. The configured gap is the minimum time Fin waits, and the follow-up count is the maximum number allowed. Instructions can guide Fin to wait longer or stop sooner.

  • To test the sequence one step at a time, use Skip ahead again when another follow-up is scheduled.

  • A reply ends the proactive follow-up sequence. Send a reply in the preview to test the move from unanswered outreach into a conversation with Fin.

Advancing the preview clock doesn't simulate real-world changes for the customer, such as a purchase or an updated subscription. A preview helps you check messages and follow-up logic, but it doesn't guarantee a live customer receives the same sequence.


How to report on proactive Skills

You can measure proactive Skills performance from the Skills list page and in custom reports, which include dedicated proactive outreach metrics and ready-made chart templates.

What do the Skills list statistics show for proactive Skills?

On the Skills list page, the statistics for a proactive Fin Skill work as follows:

  • Triggered counts conversations where the Skill ran, including unanswered proactive outreach.

  • Pending means no resolution outcome has been recorded. Unanswered outreach stays Pending even after follow-ups stop.

  • Skills list statistics are subject to reporting permissions and available columns.

Which custom report metrics measure proactive outreach?

Custom reports include these four proactive outreach metrics for proactive Fin Skills:

  • Fin proactive outreach conversations: conversations started by a proactive Fin Skill.

  • Fin engaged proactive conversations: proactive outreach conversations where the customer replied.

  • Fin unanswered proactive conversations: proactive outreach conversations where the customer hasn't replied.

  • Fin proactive engagement rate: the percentage of proactive outreach conversations that received a customer reply.

Which chart templates are available for proactive Skills?

Custom reports include these three ready-made chart templates for proactive Fin Skills:

  • Fin proactive outreach over time

  • Fin engaged vs. unanswered proactive conversations

  • Fin proactive engagement rate over time

For more customization in a custom report, use the Fin AI Agent proactive outreach reporting attribute to filter or break down conversations. Set it to true to select conversations started by a proactive Fin Skill, and combine it with Has user reply to separate engaged from unanswered conversations.

How do you find proactive conversations in the Inbox?

In the Inbox, use the Fin AI Agent Proactive outreach attribute as a filter and set it to true to find conversations started by proactive Fin Skills, including those where the customer hasn't replied. You can also create Inbox views with this attribute as a filter to monitor proactively started conversations.


What are the limitations of proactive Skills?

Proactive Fin Skills have these limitations:

  • Matching isn't immediate delivery. Messenger outreach depends on a Messenger check-in, and email matching runs approximately hourly.

  • Frequency is set per Skill. Separate Skills with overlapping audiences can each qualify the same person, so review overlapping audiences when you plan outreach.

  • Follow-up limits are upper bounds. A customer reply, an ended conversation, a handover, lost eligibility, or Fin choosing not to continue can prevent further follow-ups.

  • Fin for Salesforce: proactive outreach is supported through chat in Fin Messenger, with an enabled Salesforce Fin Messenger integration. Proactive email isn't included in periodic matching, and creating Salesforce cases or emails proactively, Zendesk-native outreach, and other platform-specific channels aren't supported yet.


Frequently asked questions (FAQs) about proactive Fin Skills

How is Reach out proactively different from Outbound messages?

Reach out proactively and Outbound messages differ in what happens once the customer replies, and in how much of the job each one carries. An Outbound message sends fixed copy on a schedule you set — if the customer replies, it becomes a new conversation for Fin or the team to pick up. Reach out proactively (a Skill trigger) opens with a personalized message and then carries the job through to the end in the same conversation, using data connectors, content, and handoffs as needed — outreach and resolution happen together. Because Reach out proactively is just another trigger on a Skill, the same Skill can also run when a customer messages in first.

Why hasn't Fin reached out to a customer who matches my proactive Skill's audience?

If Fin hasn't reached out to a customer who matches a proactive Fin Skill's audience, check these causes:

  • The Skill is published. Clicking Save to Fin Main doesn't start outreach.

  • The customer still matches the audience, including its role restrictions.

  • For Messenger, the customer's Messenger has checked in, and the customer matches any When to send event and Where to send page rule you set.

  • For email, matching runs approximately hourly, and queueing, eligibility checks, and usage limits can add delay. The customer also needs a known, deliverable email address, must not be unsubscribed, marked as spam, or hard-bounced, and your workspace email setup must be valid.

  • Reach out once per person is selected and Fin already reached out to that customer. Setting a new version of the same Skill live doesn't reset that history.


💡Tip

Need more help? Get support from our Community Forum
Find answers and get help from Intercom Support and Community Experts


Did this answer your question?